Are you a home chef looking for ways to utilize your kitchen space best? Or maybe you’re an avid homeowner who wants to take their wall décor up a notch.
The diversity of cutting board shapes, sizes, and material choices make it functional and aesthetically pleasing. Hence, your cutting boards can stand as interior decor on your kitchen walls or any part of the home.
Whatever the case, hanging a cutting board on your gallery wall is a great idea! It’s not only aesthetically pleasing but also keeps your cutting board out of the way and, more importantly, safe from water damage.
But how do you do it?
In this blog, we’ll explore some of the ways you can make this happen without using much elbow grease!
- Cutting boards can be hung with nails, magnets, and adhesive tapes
- It is always better to have a design sketch on paper before cutting.
- Nails and magnets remain the strongest method to hang the board with you want it to last.
- If you don’t want to make any changes to the home, adhesive tapes are a great option.
6 Ways To Hang Your Chopping Board On The Wall
If you’re looking for how to hang cutting boards on the wall, here are six ways that you can get the job done:
Use An Anchor And Screw
The first and most common way to hang a cutting board is using a screw. This easy and straightforward DIY method will take you only a short time.
Begin by detecting a stud on your wall. A stud finder will come in handy in this case.
Once you find a stud, the rest is easy; drive a screw into it. Then, drill a hole for the screw on the cutting boards – and that’s it!
If you can’t find a stud in your kitchen, that’s where an anchor comes in. An anchor is a device that creates a secure hold in walls, ceilings, or floors when no studs exist.
- You need to drill a hole into the wall,
- insert the hardware and drive in a screw.
- Once that’s done, get a drill bit to create a hole large enough for the screw on your wood-cutting boards.
- Then, make the hole, and you’re good to go!
Also Read: Can You Stain Cutting Boards?
Bring In Magnets
If you’re looking for an unconventional way to hang cutting boards on your gallery wall, or maybe screwing things into your wall isn’t quite your thing, a more unconventional option is magnet technology.
Using strong and powerful magnets, you can make a makeshift hanger for your cutting board.
And here, it doesn’t take rocket science to make it work. Just install a magnetic bar or two on your wall.
Then, find a way to attach some magnets to your chopping boards’ backside. You can cut some grooves on the backside of the wood cutting boards and then stick the magnets in them using an adhesive, or you can use some adhesive tape, but that may prevent the board from lying flat when hung up or even when using it.
Once that’s done, hang your cutting board on the magnetic bar, and you’ll be surprised at how sturdy it is!
Wire Wall Stand
If you don’t want to use magnets or a screw, another less conventional way is to get a wire wall stand. Actually, this is a good option if you have limited wall space or want to hang multiple cutting boards.
And in case you’re wondering what it actually is, a wire wall stand is exactly what it sounds like; it’s a metal wire you can mount on the gallery wall. It looks like a rack, but it’s made of metal wire that usually comes with a non-corrosive coating.
Here, many designs are available, from some that hold the cutting boards vertically to others that hold them horizontally. However, I recommend you go for the ones that keep your wood-cutting floca boards vertically.
Actually, one of the storage rules is that you should store your cutting board in an upright position. Keeping them in a horizontal position will provide ample time for any water on the surface to penetrate the grain, which obviously has detrimental effects.
The stands come with multiple drainage gaps at the bottom. That means you can store your cutting board immediately after washing them, and they’ll dry fast and easily.
Of course, that’s great news considering that cutting boards are susceptible to water damage, especially when exposed to it for extended periods.
As for mounting, you can either choose one that requires you to screw it into the wall or a design that lets you secure it with a sticky adhesive backing. The latter is a great option if you live in a rented space and want to avoid putting holes in your wall.
Related Read: Can You Put A Wooden Cutting Board In The Oven?
Plastic Wall Stand
There are plastic wall stands for those who love the idea of wire wall stands but want to avoid dealing with metal. They look almost the same as wire ones, only that they’re made of plastic, which is great if you’re looking for something a bit more aesthetically pleasing.
The plastic wall stands come in various colors to match the wall color. That way, you can make sure everything matches nicely when decorating your kitchen, dining room, or whatever space you’re in.
They are more affordable than wire stands, which is great news if you want to save some money.
But then again, you obviously can’t compare the strength of metal to plastic. However, this should do fine for something you need to use for a light-duty task, like holding your cutting board.
The sawtooth is one of the oldest and simplest ways to hang plastic cutting boards or wood cutting boards, art, picture frame, and almost anything else you want to display on your wall. Sawtooth hangers were the standard before modern hardware like wall stands and screws came into play.
Usually, a sawtooth supports about 25 lbs., so you’ll only need one for your cutting board. But of course, if you need more secure support for your cutting board, there’s no crime in using two for your project. And once you get the sawtooth kit, the rest is easy!
- Begin by centrally positioning the sawtooth at the top backside of your cutting board.
- You can use a pencil for marking and a tape measure to ensure you leave the same amount of space on both the right and left sides of the sawtooth.
- Then, use a drill or even a screwdriver to drive in the screws that came with the kit. Some kits come with nails. In that case, you’ll need to tap the nails in with a hammer gently.
Of course, if you suspect that the nails are too long that they could come out on the other side, it’s better to opt for the screw option.
- Once the sawtooth hanger is securely placed, drive a nail into your wall at the desired height. It’ll be better to nail it down at a 45-degree angle, providing a more secure hold.
Finally, hang your cutting board on the nail, and you’re done!
Adhesive Stick-On Tape
This is probably the easiest way to hang a cutting board on your wall. All you have to do is find a stick-on adhesive tape that can hold your chopping board’s weight.
Adhesive tapes usually come in rolls; you’ll have to cut small sections off using scissors or a utility knife. Then, position the tape on the back of your cutting board and press firmly to ensure it adheres properly.
Stick the other end of the tape to your wall, and you’re done! Just make sure you choose a stick-on adhesive tape that can hold the weight of your cutting board. Otherwise, it might fall off, and you don’t want that to happen!
Why Hanging Your Cutting Board Is Necessary
Hanging your cutting board on the wall is not just a matter of convenience, but it’s also necessary if you want to keep it in good condition for as long as possible.
Here are a few benefits:
It keeps It From Water Damage
We already mentioned how hanging your cutting board could protect them from water damage. This is especially beneficial if you live in a humid area or constantly clean the cutting board with water.
Hanging your cutting boards on the wall can add a great conversational piece to your kitchen or space. You can choose a cutting board that matches the color scheme of your kitchen and hang it on the wall for extra decor!
Saves On Space
Hanging the cutting board on the wall is a great way to save space in your kitchen. You don’t have to worry about where to put the cutting board when you’re not using them since it can stay out of the way on your wall.
Having cutting boards hanging on the wall makes it easier for you to grab them when you need to use them. This is especially beneficial if you have limited counter space.
Of course, whether you’ll enjoy this privilege depends on where you hang your cutting board. Always select a spot within your reach but away from the heat so you don’t have to strain yourself when cooking. One convenient place is the space above your sink!
Ensures The Safety Of Your Food
By storing your cutting board on the wall, you’re ensuring that your food is safe from any bacteria or dirt that could have emanated from improper storage in your cabinetry or water seeping through the wood or bamboo. It may look like a far-fetched worry, but it’s better to be safe than sorry.
Hanging your cutting board on the wall is a great way to protect it from water damage, add some decorative flair to your kitchen, save on space, and enjoy easy access.
And thankfully, there are plenty of ways you can hang the wood-cutting board, so if you don’t like one option, there’s always another one available. Keep these tips in mind, and you’ll have your cutting board hung up in no time!